Blog
How to Find Out What Is in the Air and Water Near Your Home
A step-by-step guide to the public records that show what nearby plants release, how clean your local air is and what is in your tap water, and what to do with what you find.
Every year, by the first of July, millions of American households get a document most of them throw away. It arrives folded into a water bill, as a link in an email or as a notice that the report is posted online. It is the annual water quality report from the local utility, and federal law has required it since the late 1990s. It lists what the utility tested for, what it found and whether any result broke a federal limit. That report is one of a whole family of public records, most of them created by laws Congress passed after disasters, that tell you what is in the air and water around your home. The oldest of the big ones came out of the 1986 right-to-know law, which made factories report the toxic chemicals they release each year. Nearly all of these records are free. Very few people read them. This guide is for the people who want to.
In short: You can find out a great deal about local pollution from public sources: what nearby facilities report releasing, whether they have broken the rules, what the air quality is today and what your tap water contains. The steps below walk through each record in order. None of this is medical advice; if you are worried about a health effect, talk to a doctor or your state or local health department.
Before you start: what you will need
You need your home address and ZIP code, the name of your water utility (it is printed on your water bill, or your landlord can tell you) and about an hour. A notebook or a simple spreadsheet helps, because you will be collecting facility names, permit numbers and dates from several places.
It also helps to know what these records can and cannot tell you. Most of them report what a facility says it released or what a monitor measured. They do not tell you what dose any one person received, and they do not prove that a particular illness was caused by a particular plant. What they can do is show patterns: which facilities are nearby, which ones have a history of violations, and whether your water or air has exceeded legal limits. That is often enough to ask good questions of the right agency.
Step-by-step: the facilities near you
- Start with the facilities list. Go to the polluters page on this site and enter your ZIP code. It lists EPA-regulated facilities in that area, with their recorded violations and penalties. Write down the name and address of every facility within a mile or two of your home, and mark any with recent violations.
- Look up each facility's compliance history. The EPA runs a public database called Enforcement and Compliance History Online, usually shortened to ECHO. Search it by facility name or address. Each facility's report shows which environmental programs it falls under (for example, the Clean Air Act, the Clean Water Act or hazardous waste rules), when it was last inspected, whether it is in violation now and what enforcement actions have been taken in recent years.
- Check what the facility reports releasing. For factories and certain other industries, look up the Toxics Release Inventory, the database created by the 1986 right-to-know law. The EPA offers search tools that let you look up releases by ZIP code, county or facility. The inventory shows the chemicals each covered facility reported releasing to air, water and land, and the amounts, year by year. Look at trends over time as well as the most recent year.
- Look for nearby cleanup sites. The EPA lists Superfund sites, the most seriously contaminated places in the country, on a searchable map. State environmental agencies usually keep their own lists of contaminated sites, brownfields and underground storage tank leaks. Search both.
- Note anything that confuses you. It is common to find a facility with a long list of violation codes you do not understand. Write them down. You can ask the state environmental agency or the EPA regional office what they mean, and you are entitled to an answer.
A note on a tool that is gone: for years, many people started this kind of search with an EPA mapping tool that combined pollution and demographic data by neighbourhood. The EPA took it offline in early 2025. Some universities and nonprofits have since published versions built from the archived data, but the steps above use the records the agency still publishes.
Step-by-step: the air you breathe
- Check today's air quality. The federal government's AirNow website reports the Air Quality Index for your area, based on official monitors. It covers ozone and fine particles, the two pollutants most often behind unhealthy air days, and gives forecasts. Many weather apps pull from the same data.
- Find the nearest official monitor. The EPA's air data tools let you look up official monitoring sites and download their historical readings. Note how far the closest monitor is from your home. If it is several miles away, it may not reflect conditions on your street, especially if you live near a highway, port or industrial area.
- Check whether your county meets federal air standards. The EPA publishes lists of nonattainment areas, places that do not meet the national health-based standards for one or more pollutants. If your area is on the list, your state is required to have a plan to fix it, and that plan is a public document you can read.
- Consider low-cost sensor networks, carefully. Many neighbourhoods now have privately owned low-cost air sensors, and some publish their readings on public maps. They can reveal local hot spots that regional monitors miss. They are also less precise than official monitors and need correction, so treat them as a reason to ask questions rather than as proof.
- Look up the facility's air permit. Major sources of air pollution must hold operating permits, which spell out their emission limits and monitoring requirements. Your state environmental agency usually posts these online. If you want to comment on one, a separate guide on this blog walks through that process.
Step-by-step: your tap water
- Read your annual water quality report. If you did not keep it, search your utility's website or call and ask for the latest one. The report is required for community water systems and is due by July 1 each year. It lists detected contaminants, the legal limit for each, the levels found and any violations during the year.
- Check for violations. Look for a section on violations, and note any for bacteria, nitrates, lead, disinfection byproducts or arsenic. The EPA also keeps a national database of public water system violations that you can search by system name.
- Find out about lead pipes. Under federal rules, water systems were required to publish an inventory of their service lines, the pipes that run from the water main to each building, by October 2024. Many utilities have posted searchable maps. Look up your address to see whether your line is listed as lead, galvanized, non-lead or unknown. If it is lead or unknown, ask your utility what its replacement plan is and whether it offers testing.
- Look for PFAS results. Federal monitoring has required many public water systems to test for PFAS, the forever chemicals, and the EPA publishes those results. Your utility's report may include them too. If your system detected PFAS, ask what it plans to do and on what timetable.
- If you have a private well, test it yourself. Federal drinking water rules do not cover private wells. The owner is responsible for testing. Your state or county health department can tell you which tests to run (commonly bacteria, nitrates and certain metals, depending on your area) and which labs are certified. Some states offer free or low-cost testing kits.
Step-by-step: records that are not on a website
Some of the most useful information never makes it onto a searchable map. You can still get much of it by asking.
- Request the chemical inventory for a facility. Under the 1986 right-to-know law, facilities that store hazardous chemicals above set amounts file a yearly inventory, often called a Tier II report, with the state emergency response commission, the local emergency planning committee and the fire department. Contact your local emergency planning committee (your county emergency management office can tell you who runs it) and ask how members of the public can see the inventory for a named facility. Some states post these reports; others handle requests by mail or in person.
- Ask for inspection reports. State environmental agencies inspect permitted facilities and write reports. The compliance databases show that an inspection happened; the report itself, which describes what the inspector saw, usually has to be requested. Write to the agency, name the facility and the date range you want and ask for the inspection reports and any notices of violation.
- Use your state's public records law. Every state has an open records or freedom of information law covering state and local agencies, and the federal Freedom of Information Act covers the EPA. A request should be in writing, describe the records clearly and include your contact details. Agencies have deadlines to respond, which vary by state, and may charge fees for large requests. Many agencies have an online request portal.
- Ask your water utility directly. Utilities keep far more data than they print in the annual report, including test results for individual sampling sites and the details behind their lead pipe inventory. Customers can usually get much of this by calling or writing. If a utility is publicly owned, it is generally covered by the state's public records law.
- Keep a log. Record the date of each request, who you spoke to and what you were told. If a response is late or incomplete, the log is what lets you follow up, appeal a denial or bring the problem to an elected official.
These requests are not adversarial in themselves. Many agency staff are glad to help residents who ask clear questions, and a polite, specific request often gets a faster answer than a hostile one.
What the numbers do and do not mean
Once you have the records, resist two temptations. The first is panic. A facility that reports releasing a chemical may be fully within its permit, and a detection in your water report may be far below the legal limit. The second is complacency. A legal limit is not the same as a safe level for every person, and some limits are decades old and have not kept up with new science. Lead, for instance, has no known safe level in children's blood, according to public health agencies.
The useful questions are comparative. Is this facility's record worse than similar ones? Is it getting better or worse? Is my water system's violation history longer than neighbouring systems? Are the people living nearest to the worst sources the people with the least power to object? That last question is the heart of environmental justice, and the records above are the evidence that answers it.
What to do with what you find
Before you act, spend ten minutes putting your findings in one place: a list of facilities with their violation history, the nearest air monitor and its recent readings, and the key results from your water report. A single page that shows the whole picture is far more persuasive to an agency, a reporter or a council member than a stack of printouts, and it makes it easy to notice what has changed when you check again next year.
Finding a problem is only half the job. Here are paths that tend to get results.
- Ask the agency directly. Call or email your state environmental agency or the EPA regional office with a specific question: "Facility X has been listed in violation for several quarters; what enforcement is planned?" Specific questions get specific answers.
- Bring it to your elected officials. Local council members and state legislators can ask agencies questions that residents cannot easily force. You can find yours, with contact details and recent votes, through the representatives lookup.
- Join with neighbours. A single complaint is easy to file away. A neighbourhood association or a local environmental group asking the same question is harder to ignore.
- Watch for permit renewals and comment periods. Permits come up for renewal on a schedule, and each renewal is a chance for public comment.
What you can do
The records above only matter if somebody reads them. These are good ways to put them to work.
- Run your ZIP code through the polluters page today and save the list of facilities. It takes a few minutes and gives you the starting map for everything else in this guide.
- Keep an eye on the public comment list for federal rules on drinking water, lead pipes and air toxics. When a rule affects what you found in your own records, your comment can point to it directly.
- Find a local environmental group, tenant association or legal aid organization through the organizations directory, which lists nonprofits by cause in every state. Many already know the facilities in your area well.
- Read more about the people and places carrying the heaviest pollution burden on the environmental justice topic page.
The water report that arrives each summer is a small promise the law makes: you are allowed to know. Keep the next one.